Looking for Sea Strainer Stainless 90 high flow 1npt x 1 1/4 push on fittings
 

I'm looking for a high flow inlet fitting for my sea strainers instead of the right angle 90's below.Ive been looking at the boat parts guys they all look restricted. Who makes them? I think I remember Fred at Trick carried them,mandrel bent style 90,wonder were he was getting them? Thanks for any suggestions ,Rob:ernaehrung004:

Or is it that big of deal?

heres a pick of my strainers,These 90's I found are CP,Teague and Eddie/Rex

You can make them MSC has the tubing it is for sanitary systems . Did a few for my boat just need to tig weld it.

Ive seen them before somewhere already made up in the mandrel bent style?

I really wasn't wanting to get into manufacturing,Ill have to have the knurling done and pipe thread cut into it , then polishing it to chrome finish.

Here it is - $60

Part number 05-8888841, 1" NPT X 1 1/4" HoseE 90 Deg stainless steel.

Does Stainless sell direct? I need one as well.

Thanks for the info.


Now I need a Water pick up. I bought 2 of Teague adjustable and its to long , and even getting them to make it shorter its still to long,They didn't want to spend anymore time on it, So now

I wonder how the Stainless marine one will work? The Teague was $299, Stainless is 1295.:eek::eek: that seems extreme:eek:

It needs to be adjustable about 3/4 to 1 inch from the bottom of the hull.

Any suggestions????
Thanks
Rob:drink:

somebody should beable to mod or start with what Ive got and make one form it?

I've got a buddy in western GA, that could help you out.

Shoot me an email, and I'll get you hooked up with him.
Yankey