Kudos to Dustin Whipple
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: Spicewood, Texas USA
Posts: 1,382
Likes: 0
Received 3 Likes
on
2 Posts
Kudos to Dustin Whipple
I had a Whippled 496 on the dyno last week. The A/F was not where I wanted it so I called Dustin. He was leaving on vacation the next morning but said he'd write a calibration script and leave it with the guys to load while he was gone. I faxed him the data and next day shipped the PCM to them. Sure enough I got the PCM back 3 days later. Ran it on the dyno and all the numbers were perfect.
Thanks Dustin!
Bob Lloyd
Full Throttle Marine
Thanks Dustin!
Bob Lloyd
Full Throttle Marine
#4
Registered
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
I had a Whippled 496 on the dyno last week. The A/F was not where I wanted it so I called Dustin. He was leaving on vacation the next morning but said he'd write a calibration script and leave it with the guys to load while he was gone. I faxed him the data and next day shipped the PCM to them. Sure enough I got the PCM back 3 days later. Ran it on the dyno and all the numbers were perfect.
Thanks Dustin!
Bob Lloyd
Full Throttle Marine
Thanks Dustin!
Bob Lloyd
Full Throttle Marine
#6
Correspondent
Correspondent
In my experience, Dustin is a stand-up guy who does what he says he's going to do.
Plus, he's fun go hang out with. As Jules said in Pulp Fiction, "Personality goes a long way."
Plus, he's fun go hang out with. As Jules said in Pulp Fiction, "Personality goes a long way."
#9
Registered
Join Date: Jun 2007
Location: Texas
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
I would like to thank Dustin & Bob. It was my motor on the dyno and it is nice when you have worked long and hard, to have the help from stand up companys. They both come highly recomended from me.
Now if I could get over being sick so I can install the damn thing.
Now if I could get over being sick so I can install the damn thing.