If new part damages my new engine what should I expect from vendor?
Not assigning blame or anything like that,just want honest
straight opinion on what is right of me to expect. Long story short a new manifold from a vendor here had a casting flaw that leaked water into my just rebuilt engine bending a rod. We have verified new manifold is leaking and there was no other contributing factor. Should I ask for more than just a replacement manifold like some compensation for having to redo my engine once again or is that out of what would be considered normal. I have not contacted the vendor yet because I didnt want to either be unreasonable or get taken either. I think there are enough profesionals on here for me to guide my actions better than on my own. If this is not the right place to ask this then feel free to move it. Thank you, [email protected] |
I doubt they will do anything more than replace the manifold.
|
Originally Posted by HTRDLNCN
(Post 2866148)
Not assigning blame or anything like that,just want honest
straight opinion on what is right of me to expect. Long story short a new manifold from a vendor here had a casting flaw that leaked water into my just rebuilt engine bending a rod. We have verified new manifold is leaking and there was no other contributing factor. Should I ask for more than just a replacement manifold like some compensation for having to redo my engine once again or is that out of what would be considered normal. I have not contacted the vendor yet because I didnt want to either be unreasonable or get taken either. I think there are enough profesionals on here for me to guide my actions better than on my own. If this is not the right place to ask this then feel free to move it. Thank you, [email protected] What does the guarantee say? |
You know, I have never thought to pressure check a NEW manifold. I always assumed they were NEW.
|
I had a new Scat crank in my Cobra motor and it snapped with in 15 miles. Toasted most of a $20k engine and they would only cover the crank.
|
Thats Called....
The Kodak rule. They replace the can of film-
Think about those implications on a movie shoot. Should you ask for something? Absolutely. Will you get it likely not. Completely blows dude sorry. Uncle Dave |
Depends on how they run their shop. If they run it like most then you will only get the new part. If they do it like I would then they would fix everything. Today one of my subs nocked over a glass piece of art in one of my customers house. This thing is many pieces and cost 60,000 bucks!! It was broken already so we could have said nothing. I made him go in and tell the customer. The owners wife said that they will just ship it back to australia and let us know how much it is. My guess is that we will never see a bill but you got to do what is right. Unfortunatly this is the marine industry.....
|
Originally Posted by daredevil
(Post 2866316)
When will u open your shop ???????:grinser010:
i will be a real good costumer !!!:evilb: |
Originally Posted by Audiofn
(Post 2866288)
Depends on how they run their shop. If they run it like most then you will only get the new part. If they do it like I would then they would fix everything. Today one of my subs nocked over a glass piece of art in one of my customers house. This thing is many pieces and cost 60,000 bucks!! It was broken already so we could have said nothing. I made him go in and tell the customer. The owners wife said that they will just ship it back to australia and let us know how much it is. My guess is that we will never see a bill but you got to do what is right. Unfortunatly this is the marine industry.....
|
All times are GMT -5. The time now is 03:20 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.