WW looking too Chat with you... Just got done running with props spinning IN.
Could you PM me your # and A good time to Contact You, Thank In Advance S.K. ( 377 talon)
WW thanks for your help 2 day, I did Get a call from "Glass Dave" (great guy), Gained some insight into the prop. rotation, our rig is more stable turning out...Their set up to run @ P1 spec speeds,the biggest prop they run is 30ish pitch, but dose agree this rig is way off in MPH... did some digging and found some other talon owners I'm hopping this leads too more ? answered... I'm begining to think that these 34's where not the props for the boat... Or they were damaged at some point....
what is the weight on your boat again? the boat GD throttles is 10,500 we are 11,400 full fuel 280 gallons!
Last edited by soinc; 06-08-2009 at 10:21 PM. Reason: wrong weight
We are at around 10 1/2 % slip with 3 1/4" X dimension 1.24 ratio and 36.5 p 16 7/8" diameter labbed 5 blades that we also spin to 6500 rpms.
I have a set of B Blades 36.5 16 3/4" labbed 4 blades that we only ran a few times. They are dead even pitch and cup, maybe a touch light on diameter as my rig likes 17" plus in a 4 blade and will only handle when turning in.
From what you told me today I believe these props may get you into the 140s with out hitting your rev limiter.Your welcome to try em!
Happy dialing !
When your get dialed in and you decide you want to run easy mid 150s on 93octane we will hook you up with two Ice Injection Kits at dealer cost as well as the necessary pulleys for your 1471's, jets/,bleeds for your 3 circuit carbs,tune up etc.
The only thing you will need to do different is to pull your egts from 2 holes ,your hottest and coolest , not from your collector which is fine for fuel ratio but not for egts.
Tried to mail and call you! Hope you didn't melt anything!
10 lbs of boost on pump gas only with your static compression and roots 14-71 is pushing it at least compared to anything we have tested on the water even with toluene added.
Its amazing the difference between dyno #s / tune up and real world in your boat ,water temps , water pressure etc.
We run 10% Toluene @ $2.26 per gallon 55 gallon drums to 93 pump gas then at 8lbs kick in our Meth injection, this season 16 lbs of boost at wot or heavy load.
You really need to pull EGTs from your hottest hole and a cold hole from your header tubes an inch or so from the head not from your collectors.
I'm thinking that your EGTS may be hotter than you think based on our conversation!
Feel free to call the cell, hope all is well with your rig!
Alum Metal Fab
Custom Marine Sales
Dave's Custom Boats
Diamond Performance Parts
Double R Performance
Elton Porter Insurance
Fastboats Marine Group
GGB Exhaust Technologies
Grand Sports Center
Ilmor High Performance Marine
Lake Cumberland Marine
Lake Havasu Boat Show
Marine Technology Inc
McLeod Design Group
Performance Boat Center
Performance Marine Trading
Potter Performance Engines
Ron Sporl Performance
Speed and Custom Marine
Total Dollar Insurance
Teague Custom Marine
Wake Zone Marine Insurance
Young Performance Marine