If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Follow us on Facebook Follow us on Twitter
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2009

    Bravo alignmant tool

    its seems to me that the outdrive shaft is only going into the coupler abotu 21/2 inches is that as much as it is suppost to go in thankyou james

  2. #2
    Join Date
    May 2009
    is it an older bravo? the older bravos require you to modify the tool and turning it down to the smallest diameter of the tool. where there is that step, basically make that step disappear.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
All times are GMT -5. The time now is 02:43 PM.
Powered by vBulletin® Version 4.2.0
Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.
Search Engine Optimization by vBSEO 3.6.1
Original Poster In Postbit provided by Original Poster In Postbit v1.0.0 (Free) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.
Copyright 2011 OffShoreOnly. All rights reserved.