that's true..Ron P hooked me up for a ride a few years ago..sat in back..the needle read 183mph!..what a ride!! :evilb:
Originally Posted by vnemous
(Post 2908137)
And he has GPS mounted in the back of the headrest of the front seats so the rear passengers know how fast they are going. Too cool.
|
I was in this boat once, back in the mid to late 90s, for the "Radar Shootout". I remember the button marked "showtime" which dumped and ignited fuel causing the flames to shoot out. That day we saw 177mph. We went so far, so fast, I remember somene saying, "are we still in Barnegat Bay" and someone else said "I don't the we are in NJ anymore".
Great guy and a great boat. |
Originally Posted by Quinlan
(Post 2909546)
"Average speed of 73 mph for 62 hrs"! And didnt they have some fuel issues and had to pump out and reload?
Incredible. So what was top speed? Her top speed was 69.6 knots or about 80mph. If I recall, a fuel tender met them at pre-determined coordinates out in the middle of the Atlantic a few times to issue fuel and supplies. The dam thing was like a speeding tanker! She also had a bit more than the turbine:drink: Total, (2) MTU 16V396TB94 diesels each generating 3,480 H.P. are coupled to KaMeWa #63 waterjets. The gear boxes are AFBU7755's. In addition there is a diesel fuel burning Lycoming Marine Turbine #TF40 developing 4,500 H.P. coupled to an ARNESON surface drive turning a Rolla REXP 5 bladed cleaver. Fuel consumption is approximately 317gals per hour at 45 knots under the MTU's only, giving a range of approximately 1250 nautical miles. Fuel Consumption: 1,200 L (317 gal)/ Hr at 45 kts (Diesel engines only) / 2,300 L (608 gal)/Hr at 63 kts Generators: 2 x 55 Kw + 1 x 12.5 Kw Fuel Capacity : 37,000 L (9,774 gal) Water Capacity : 895 L (235 gal) Water Maker: 4,540 L (1,200 gal) / Day water making capacity CHAPMAN TROPHY Miami to New York Boat: Gentry Eagle Record time: 19 hours & 17 minutes ROUND TRIP Miami - Nassau (Bahamas) - Miami Boat: Gentry Eagle Record time: 5 hours & 20 minutes http://www.gentryeagle.com/images/Bridge%20Fade.jpg |
Originally Posted by KNOT-RIGHT
(Post 2907818)
Yes thats right Fusco,s been running Turbines for years.
Now we use a Brake and Crashboxes to shift. Here is my setup http://www.youtube.com/user/aliddl3c.../2/2HpbYDFGrkA I have a question on your setup. I'm kind of lost here. When you apply the brake, and it stops the propshaft, is it also stopping the turbine from spinning?? Or is there a disconnect somehow? Darrell. |
Originally Posted by DMOORE
(Post 2910161)
I have a question on your setup. I'm kind of lost here. When you apply the brake, and it stops the propshaft, is it also stopping the turbine from spinning?? Or is there a disconnect somehow?
Darrell. The t53 is a free wheeling Turbine The N1 (gas producer) is completly independent. The N2 is the power turbine. The t53,s ouput shaft (n2) can be stopped at ground idle for up to a minute. About 12 years ago Ted McIntyre from MTT developed a braking system to bolt to the output of the t53 then attached a scs crashbox. This is the same technology used by most today. This will keep you busy:drink: http://www.offshoreonly.com/forums/s...ine-101-a.html |
Originally Posted by KNOT-RIGHT
(Post 2910260)
The t53 is a free wheeling Turbine
The N1 (gas producer) is completly independent. The N2 is the power turbine. The t53,s ouput shaft (n2) can be stopped at ground idle for up to a minute. About 12 years ago Ted McIntyre from MTT developed a braking system to bolt to the output of the t53 then attached a scs crashbox. This is the same technology used by most today. This will keep you busy:drink: http://www.offshoreonly.com/forums/s...ine-101-a.html Thank you for the response. It makes a lot more sense now. Darrell. |
Originally Posted by KNOT-RIGHT
(Post 2910260)
The t53 is a free wheeling Turbine
The N1 (gas producer) is completly independent. The N2 is the power turbine. The t53,s ouput shaft (n2) can be stopped at ground idle for up to a minute. About 12 years ago Ted McIntyre from MTT developed a braking system to bolt to the output of the t53 then attached a scs crashbox. This is the same technology used by most today. This will keep you busy:drink: http://www.offshoreonly.com/forums/s...ine-101-a.html |
Originally Posted by Rik
(Post 2910455)
Ted was not the first to do this.
Well spill the beans bro. |
Originally Posted by KNOT-RIGHT
(Post 2910544)
Well spill the beans bro.
|
Maybe it's my old eyes and the resolution. But right at around 3:05 into the vid, didn't he accelerate right in front of a dinghy? Looked like they were taking cover :eek:
|
All times are GMT -5. The time now is 12:59 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.