good paint and glass repair in western MI?
I need the pad on my boat blueprinted and my Dad wants his stripes repainted and some minor repair on his cig. Any recommendations? Does Mitcher T do glass work?
|
Originally Posted by DisturbedVelo22
(Post 2965799)
I need the pad on my boat blueprinted and my Dad wants his stripes repainted and some minor repair on his cig. Any recommendations? Does Mitcher T do glass work?
|
I thought that I read a post that Sunsation Powerboats was doing glass work.
|
MitcherT does not do glass work---he specializes in aritistic paint work (for boats) and he is extremely good at it!
There is a guy named Martin Bowker of Bowker Fiberglass who can blueprint your hull....he can do some painting, but nothing too flashy---his specialty is fiberglass repair and he is does very well with that, but I do not think he does any vacumn bagging with his repairs. He is located in Zeeland, Michigan which is just out side of Holland. Martin's cell phone is 616-218-1683 If you want vacumn bagging, then you may have to look on the East side of the state, but I cannot remember right off who does it over there. |
Originally Posted by KAAMA
(Post 2965878)
MitcherT does not do glass work---he specializes in aritistic paint work (for boats) and he is extremely good at it!
There is a guy named Martin Bowker of Bowker Fiberglass who can blueprint your hull....he can do some painting, but nothing too flashy---his specialty is fiberglass repair and he is does very well with that, but I do not think he does any vacumn bagging with his repairs. He is located in Zeeland, Michigan which is just out side of Holland. Martin's cell phone is 616-218-1683 If you want vacumn bagging, then you may have to look on the East side of the state, but I cannot remember right off who does it over there. |
Originally Posted by DisturbedVelo22
(Post 2965799)
I need the pad on my boat blueprinted and my Dad wants his stripes repainted and some minor repair on his cig. Any recommendations? Does Mitcher T do glass work?
|
pm glassdave here on the board, he is in Toledo. he painted my tiger when someone else F'd it up, and he is redoing my 20 cig.
|
Originally Posted by KAAMA
(Post 2965878)
MitcherT does not do glass work---he specializes in aritistic paint work (for boats) and he is extremely good at it!
There is a guy named Martin Bowker of Bowker Fiberglass who can blueprint your hull....he can do some painting, but nothing too flashy---his specialty is fiberglass repair and he is does very well with that, but I do not think he does any vacumn bagging with his repairs. He is located in Zeeland, Michigan which is just out side of Holland. Martin's cell phone is 616-218-1683 If you want vacumn bagging, then you may have to look on the East side of the state, but I cannot remember right off who does it over there. ed |
Chris Mills at Extreme Body Works in Holland: http://www.kustompaintedboats.com/index.html
or: Michael Evenhouse Yacht Restorations : (616) 392-2592 241 W Lakewood Blvd, Holland, MI 49424 Shop is the bldg at the right in front of Lakewood Storage. |
Originally Posted by woogie
(Post 2966019)
Chris Mills at Extreme Body Works in Holland: http://www.kustompaintedboats.com/index.html
or: Michael Evenhouse Yacht Restorations : (616) 392-2592 241 W Lakewood Blvd, Holland, MI 49424 Shop is the bldg at the right in front of Lakewood Storage. Chris is right over by me, and has done a lot of nice work for me. |
All times are GMT -5. The time now is 06:52 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.