Quick Help With Prop Needed
#1
Registered
Thread Starter
Join Date: Jan 2002
Location: S.F. Bay Area
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Quick Help With Prop Needed
How do you measure the 'spline' size of a prop?
I'm selling a used Quicksilver Mirage 19p prop and someone asked me the spline size. I have no idea what it is as I bought the prop used myself, and it just fit right on the prop shaft of my Bravo 1.
The prop numbers are (48 13700 A41 19P) if that helps.
thank you
I'm selling a used Quicksilver Mirage 19p prop and someone asked me the spline size. I have no idea what it is as I bought the prop used myself, and it just fit right on the prop shaft of my Bravo 1.
The prop numbers are (48 13700 A41 19P) if that helps.
thank you
#2
Registered
It fit on the bravo drive ? Count the number of splines carefully . I can't remeber but I think it is like 14 or 15 splines on a bravo . To messure spline size you need something to acurately messure how thick the shaft is where the spline are . Usualy smaller then the actual prop shaft size .
Some one must know ,come on help the guy out ! It's not like this is the only bravo out there !
Some one must know ,come on help the guy out ! It's not like this is the only bravo out there !