Where can I buy 1" airex??? Only need like a 2' X 2' piece...
#2
Charter Member #232
Charter Member
Try Composite One in RI. Not sure if they will sell you a small piece or not. You could try calling up Outer Limits and other builders in the area and see if they can cut you a piece.
__________________
Put your best foot forward!
Put your best foot forward!
#8
what do you need it for? i have some pieces of scored 3/4 that are at least 2'x2'
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#9
Registered
Thread Starter
i need it to close off a section of my door to the cabin. my boat used to be a race boat and when they cut my door opening they cut it to close to the gauge panel, and it started to crack from the top of the door towards the gauge panel, because it is only like a 2 inch strip. so I am going to close back off the horizontal part of my opening, re-glass all the old gauge panel openings that arent being used anymore, and behind the dash, the whole width of the dash put two more layers of glass......im just trying to stiffen up that part of the boat