Where can I buy 1" airex??? Only need like a 2' X 2' piece...
 

Anybody????

Try Composite One in RI. Not sure if they will sell you a small piece or not. You could try calling up Outer Limits and other builders in the area and see if they can cut you a piece.

You could also try Jamestown Distributor's. They might. Oh they are in RI as well.

thanks guys, ill give them a try.....

no luck, they'll only sell whole sheets, anybody else???

How much is a sheet?

$500 or something crazy

what do you need it for? i have some pieces of scored 3/4 that are at least 2'x2'

i need it to close off a section of my door to the cabin. my boat used to be a race boat and when they cut my door opening they cut it to close to the gauge panel, and it started to crack from the top of the door towards the gauge panel, because it is only like a 2 inch strip. so I am going to close back off the horizontal part of my opening, re-glass all the old gauge panel openings that arent being used anymore, and behind the dash, the whole width of the dash put two more layers of glass......im just trying to stiffen up that part of the boat

Could you use lighter density foam? Or plywood?