Long Island surveyor??
#1
Registered
Thread Starter
Join Date: Nov 2003
Location: Lanoka Harbor, NJ
Posts: 3,354
Likes: 0
Received 0 Likes
on
0 Posts
Long Island surveyor??
Looking for a reputable Long Island, NY surveyor in Pt. Washington area ... NAMS, SAMS, YAMS, BAMS, CAMS, DAMS, HAMS, JAMS, etc certified. Please throw out some names, thanks!
#2
One of these should be able to help you out
http://www.limarinesurveyor.com/
http://www.marinetechnology.info/
http://seasidemarinesurveyors.com/
http://www.mmsurveying.com/
http://www.limarinesurveyor.com/
http://www.marinetechnology.info/
http://seasidemarinesurveyors.com/
http://www.mmsurveying.com/
#3
my favorites on the island are Dave Young, Rinnie Alcus and Pete Barth...they are all straight up guys and all have the experience needed to do the job RIGHT...i have worked with all of them on many occasions when i was in the marine ins Biz....
Dave Young
Dolan & Young Marine
P.O. Box 568
Jamesport, New York 11947
631-722-3160 -O & R, 631-722-5760 -Fax
[email protected]
Pete Barth Sr
Small Boat Marine Service
108 Darrow Lane
Greenlawn, New York 11740
631-757-5537 -O, 631-278-4223 -Mobile, 631-757-5537 -Fax
[email protected]
Ronnie Alcus
Alcus Marine Technical Services Inc.
P.O. Box 700
Moriches, New York 11955 0700
631-874-1000 -O, 631-874-3000 -Fax
[email protected]
tell them George who used to work at travelers sent ya
Dave Young
Dolan & Young Marine
P.O. Box 568
Jamesport, New York 11947
631-722-3160 -O & R, 631-722-5760 -Fax
[email protected]
Pete Barth Sr
Small Boat Marine Service
108 Darrow Lane
Greenlawn, New York 11740
631-757-5537 -O, 631-278-4223 -Mobile, 631-757-5537 -Fax
[email protected]
Ronnie Alcus
Alcus Marine Technical Services Inc.
P.O. Box 700
Moriches, New York 11955 0700
631-874-1000 -O, 631-874-3000 -Fax
[email protected]
tell them George who used to work at travelers sent ya
#6
Registered
Thread Starter
Join Date: Nov 2003
Location: Lanoka Harbor, NJ
Posts: 3,354
Likes: 0
Received 0 Likes
on
0 Posts
How about John N. Lowe? No one else seems to have Merc computer & software to run computer diags on pair of 496 mags, he does. So anyway George/C5 tried Ron Alcus (left message), tried Pete Barth (left message) and tried Gary Friend and Charlie Avalos. Ened up booking a date with John Lowe after all said and done, hopefully a good choice, THANKS again!!
#7
Registered
Join Date: Dec 2008
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
try frank abbey at s&s marine affiliates 516 378 2008 their e-mail is [email protected] tell bob pyzeski sent you
#8
survey
If you need diagnostic scans/reports you want a mercruiser dealer or someone who works on them often. Ron Alcus is good,I dont know if he has a DDT.
If not you can Call Ed Reilly (E&R in freeport) 516-424-7056 or 516-867-6737. you wont be disappointed.
Mike
If not you can Call Ed Reilly (E&R in freeport) 516-424-7056 or 516-867-6737. you wont be disappointed.
Mike
#10
Platinum Member
Platinum Member