KE 825 EFI's
What oct. fuel do they need ? I can't find any info on line, I can't even find a list of motors he sells just a bunch of parts. Is there a secret web site I can't find ?
|
|
They dont list his 825 and only his NA motor says 92 oct. I hope he has it setup to run on 89 oct. like most of the other builders are doing.
|
Keith Eickert is with Lightning Performance Group. You can give him a call about the 825 engine. Not all of the engines are listed on the website. His number is 217-415-9568.
|
Originally Posted by LapseofReason
(Post 3001130)
They dont list his 825 and only his NA motor says 92 oct. I hope he has it setup to run on 89 oct. like most of the other builders are doing.
|
Originally Posted by Jassman
(Post 3001386)
when I had his 675's in the A.T. they ran on 92..The 825's were in a 04 43 Nor-Tech and if I remember correctly..same..92.. I always ran 93..
|
Originally Posted by LapseofReason
(Post 3001504)
Thats what I was thinking, I will call him and see if it's still that way. I hope he made some changes to run on 89. He needs too since there are other builders with over 1000 hp on 89. There are two boats I am looking at with his 825's and it's too hard to get 92oct all the time.
|
call and check, on a efi with knock sensors you might be able to run 89, should pick it up [knock[ and cut the timing back some until you get the 92 in it
|
Originally Posted by LapseofReason
(Post 3001504)
Thats what I was thinking, I will call him and see if it's still that way. I hope he made some changes to run on 89. He needs too since there are other builders with over 1000 hp on 89.
|
All times are GMT -5. The time now is 03:23 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.