Originally Posted by CAL MAN (Post 3013241)

Ya think?:evilb:

Smokie:bigbird: The duck stealer

Originally Posted by Voodoo (Post 3013063)

Hello Gatorone, not sure what u mean by standard heads, aluminum, conventional maybe, was going to run big chiefs heads but worried about geometry issues, i am a realist though and understand we may not achieve these numbers on 93 oct. in my opinion detonation would be our enemy on making big hp on pump gas, u cant see in the pics, but i have methanol injection which should aid a little in detonation as additional boost is applied, do you have expierince with similiar engine combos?

Originally Posted by SHAWN DAVIS (Post 3013203)

It's pump gas if its pumped from a drum into the boat right?

Originally Posted by B Idol 1 (Post 3013362)

VooDoo detonation is always the ENEMY !!! inj sounds like a real cool idea what boost are you planning on running with them PSIs ???

Originally Posted by GATORONE (Post 3013458)

great....he will be lucky to be on plane in 5.9 sec's...good comparison

Originally Posted by GATORONE (Post 3013458)

great....he will be lucky to be on plane in 5.9 sec's...good comparison

Originally Posted by SHAWN DAVIS (Post 3013531)

will your boat plane in 5.9 seconds? Build your own motors?
He has had a little help with this combo, we have been running big screw blown bbc's in our boats over 6 years, can make over 1400 hp and have been over 170 many many times. And NEVER hurt a single piston,headgasket,valvetrain componet.