sneak peak/ fastest 42 tiger engine
#341
Registered
Join Date: Jun 2007
Location: Denham Springs La.
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
#342
skater brother
Platinum Member
Join Date: Feb 2006
Location: waggaman la
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
#343
VIP Member
VIP Member
Did you say You like to see HOMOS naked????????????????????????????????????????????? ???????????????????????????????
Last edited by GATORONE; 01-13-2010 at 08:44 PM.
#344
skater brother
Platinum Member
Join Date: Feb 2006
Location: waggaman la
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=GATORONE;3023384]well it's 5 ft shorter in the running surface..it does not have a european diving board on the back.... /QUOTE]
oopoo A EUROPEAN DIVING BOARD
oopoo A EUROPEAN DIVING BOARD
#346
Banned
Join Date: Dec 2009
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
#347
Banned
It was said that runninghot had homebuilt engines I thought he had a bad deal with someone in Arizona or somewhere out west remeber the thread it was like a million pages. Last I heard and what I read on the thread that is still left by the "Evil engine builder" that they where at some shop in Chicago. Was the shop his garage??? I thought Ateco rebuilt them?
Let me clarify db71
Yes ATECO did and they built them at 9.42 - 1 compression to run on 116 octane fuel for everday boating and when i B!@tched they wanted to put my big chief heads in the bridgeport and houge them out and i said NO WAY !!!!! were out of here
#348
Banned
Join Date: Dec 2009
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Let me clarify for ya db71
I copied & pasted this off an email from RHR this morn since he's banned from @S@ and getting P.M.s @ Serious to stop on by .
Yes ZASTROW @ ATECO attempted to do the rebuild and they built them at 9.42 - 1 compression to run on 116 octane fuel for everday boating and pleasure when we specified PUMP GAS !!!! , when i B!@tched about it they wanted to put my big chief heads in there bridgeport machine and hog out the chambers and put a .080 head gasket for a bandaide job i said your FIRED !!!! paid them for the build and picked up my ch!t & moved on ..Its all good i only lost 4 mos of our boating season and winter is here but she'll be dialed this spring and we'll get a rockin video posted WITH GPS RECALL , TACH & BOOST showing in our Vid not just video taping the clouds,waves,& rooster tails ..Can you really judge speed of a boat by the rooster tails ?????? just Curious anybody
__________________
ROCK ON !!!!!!!!!!!!!!!!!!!!!!!!!!!
ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!
DRYDEN PERFORMANCE MARINE 302-367-4962
I copied & pasted this off an email from RHR this morn since he's banned from @S@ and getting P.M.s @ Serious to stop on by .
Yes ZASTROW @ ATECO attempted to do the rebuild and they built them at 9.42 - 1 compression to run on 116 octane fuel for everday boating and pleasure when we specified PUMP GAS !!!! , when i B!@tched about it they wanted to put my big chief heads in there bridgeport machine and hog out the chambers and put a .080 head gasket for a bandaide job i said your FIRED !!!! paid them for the build and picked up my ch!t & moved on ..Its all good i only lost 4 mos of our boating season and winter is here but she'll be dialed this spring and we'll get a rockin video posted WITH GPS RECALL , TACH & BOOST showing in our Vid not just video taping the clouds,waves,& rooster tails ..Can you really judge speed of a boat by the rooster tails ?????? just Curious anybody
__________________
ROCK ON !!!!!!!!!!!!!!!!!!!!!!!!!!!
ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!
DRYDEN PERFORMANCE MARINE 302-367-4962
Last edited by EATSLEEPBOAT; 01-14-2010 at 12:20 PM.
#350
Banned
Join Date: Dec 2009
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Voo Doo & Shawn any more progress on these motors ? PSI show up ??? good luck looks impressive ,find any significant power diff with the huge spacer under the carbs u found ???? congratz
Last edited by EATSLEEPBOAT; 01-14-2010 at 10:54 AM.