Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   intake manifold gasket question (https://www.offshoreonly.com/forums/general-boating-discussion/222723-intake-manifold-gasket-question.html)

joepequa 01-13-2010 07:14 PM

intake manifold gasket question
 
hi looking for a better fitting intake gaskets for 598 tall deck dart heads,the felfro 1275 that i have been using seem to squrim out and dont fit wright around the water ports,any ideas or part numbers. thank all

joepequa 01-13-2010 07:43 PM

hi

joepequa 01-13-2010 08:11 PM

gasket

Pro1 01-13-2010 08:25 PM

Your using the worng gasket. BB Chevy Felpro has 8 different intake gaskets. Look in the book they list one for those heads.

MER Performance 01-13-2010 08:38 PM

I use a custom made graphite with a stainless steel core, not some paper gasket that wicks water. If I can help further feel free to contact me.

joepequa 01-14-2010 05:35 AM

The intake and heads where opened up to the felpro 1275 gasket I will need a gasket that will match the port size any ideas thanks.

joepequa 01-14-2010 03:20 PM

dart pro 1 and dart intake

joepequa 01-14-2010 05:32 PM

hi

H2Xmark 01-14-2010 08:14 PM

i have had good luck with the Hardin marine nitrile intake gaskets, no metal core so you can gasket match real easy, they stay in place, wont move, they look like they have a sticky type coating on both sides ,dont wick water like a paper gasket, and they make about 4 or 5 different types for big block chevy heads with and without upper bolts .

Boyd Racing Eng 01-14-2010 09:27 PM

Use a 1275S-3 , It has a steel core and won't "squirm" out on you.


All times are GMT -5. The time now is 03:18 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.