Bravo Xr's On Top Gun
#11
arneson-industries.com
Offshoreonly Advertiser
That's easy. The Arnesons and that is no b.s.
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#13
VIP Member
iTrader: (1)
Arnesons are expensive to convert--23-25K per side I believe. Yes it's true they most likely will never break, but you can also buy and repair alot of XR drives for 40 grand over the life of the boat.
My only comment is that I wish Arnesons were less costly, then I would convert my rig.
My only comment is that I wish Arnesons were less costly, then I would convert my rig.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#14
arneson-industries.com
Offshoreonly Advertiser
It will also accelerate faster, cruise faster and have a faster top speed and did I mention you will not break them!
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#16
VIP Member
iTrader: (1)
Rik--
What is the expected increase in top speed ???
Just wondering because when I asked about them for my Baja, you didn't leave me with the impression that I would see a top speed increase.
What is the expected increase in top speed ???
Just wondering because when I asked about them for my Baja, you didn't leave me with the impression that I would see a top speed increase.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#17
arneson-industries.com
Offshoreonly Advertiser
Typically 10 mph mid range and 10+ on top end.
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#19
arneson-industries.com
Offshoreonly Advertiser
You mean one of these?
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
Last edited by Rik; 03-18-2010 at 11:35 AM.