Whipple 1075sci upgrade
#21
Registered
Thread Starter
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
Here's a video of some of the testing. Keep in mind, the pulleys and front plate are prototype, nice, billet, pocketed pieces are being made now.
http://www.youtube.com/watch?v=X40lipwu7O0
http://www.youtube.com/watch?v=X40lipwu7O0
#25
Registered
Thread Starter
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
Stock overspeed warning is 6100rpm, rev limit cut off is at 6200rpm so technically stock is 6200rpm. I changed the rev stock and after to see the power differences. Stock falls off after 6200 and boost climbs significantly unless I open the valve more. The bigger SC's continue to climb in power until 6500rpm where the cam is just not working anymore.
#27
VIP Member
VIP Member
still amazed at this Dustin, theoretically one could have a 1075+ for significantly less than a merc charges AND be more efficient. that is awesome.
#29
Registered
#30
Registered