Twin turbo engines
#52
Platinum Member
Platinum Member
#53
Registered
What software are you using with the MQ12?
DescPro I assume?
Dont know much about it but it seems like a pretty comprehensive controller!
Killer setup! Cant wait to see it fly through the traps at LOTO!
DescPro I assume?
Dont know much about it but it seems like a pretty comprehensive controller!
Killer setup! Cant wait to see it fly through the traps at LOTO!
#54
Registered
Thread Starter
Yep, the transmissions we are putting in this one are electronically shifted so we can have the engine drop the power for a sec so it doesn't break the #6 when it shifts. And some other cool electronic stuff
#55
we are using pectel mq12 computer. we are programming it ourselves.
it has all kinds of detonation control with 8 different knock inputs with variable gain control on each one.
but we will not have any knock sensors on the engine because we know how to tune it right so we wont need any..
it has all kinds of detonation control with 8 different knock inputs with variable gain control on each one.
but we will not have any knock sensors on the engine because we know how to tune it right so we wont need any..
Now if your after Gatorones 93 pump gas speed you might need some.
#56
Registered
#57
arneson-industries.com
Offshoreonly Advertiser
You know that if you had put Arnesons on it you would not have to so concerned about breaking a #6!
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#58
Platinum Member
Platinum Member
#60
arneson-industries.com
Offshoreonly Advertiser