Cigarette HEAD
I hate to interupt all the "other stuff" going on in the GD section, but....
Does anyone know or have a part #/LINK to the mascerator pump used in the Cigs? This is the pump that not only does the grinding work, but also pumps seawater in, and down to the toilet. It is the one with 3 hose fittings. I think it might be 37041-0010 but can anyone confirm?? Thanks, Eric |
Check with screamineagle in the cig forum. He just redid the head in his bullet.
|
Originally Posted by wayne272
(Post 3093801)
Check with screamineagle in the cig forum. He just redid the head in his bullet.
|
I doubt that you need to use the same exact one. As long as the hoses are the same size the Crap isn't going to care what number is on the pump.
|
Originally Posted by Von Bongo
(Post 3093871)
I doubt that you need to use the same exact one. As long as the hoses are the same size the Crap isn't going to care what number is on the pump.
I agree, I was just hoping that it was the same style pump because it was hard to tell online. It's already been shipped to me so I guess we'll find out soon enough. |
Thought I'd update for people searching in the future....
This pump was the right one. Model 37041-0010. It pulls the water in from outside, pushes it down to the toilet, and simultaneously mushes up everything and shoots it into the holding tank. Now all I have to do is get the truck running and I might actually be able to boat.... |
All times are GMT -5. The time now is 07:55 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.