Rigid vinyl trim & molding ????
#1
Rigid vinyl trim & molding ????
Anybody know where to get trim like this but with a better selection http://tacomarine.com/cat--Rigid-Vin..._moulding.html I'm looking for something flat about 1 1/4" or 1 1/2" wide.
#2
you need a better selection then Taco? Thought they had just about everything ever made trim wise. Do you need the trim itself to be flat no other features or angles, like the V25-9596
but in 1 1/4"?
but in 1 1/4"?
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Last edited by glassdave; 04-30-2010 at 06:14 AM.
#3
Registered
iTrader: (2)
Join Date: Sep 2005
Location: Lake Norman/ Cornelius, NC
Posts: 1,630
Likes: 0
Received 3 Likes
on
2 Posts
Anybody know where to get trim like this but with a better selection http://tacomarine.com/cat--Rigid-Vin..._moulding.html I'm looking for something flat about 1 1/4" or 1 1/2" wide.
http://www.barbourcorp.com/
Good luck.
T
#4
Gold Member
Gold Member
Join Date: Oct 2000
Location: Erie, PA US
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
#5
Registered
Does anyone on the board work for Taco? I work for a company that manufactures rigid and soft parts like this. We have 50 extruders making products 24/7. I need some boating customers for the expense account I wonder how competitive Barbourcorp is in that market?
#6
Yeah Dave just like that but 1 1/4" wide. I couldn't find anything from Taco. Your right they usaully have everything.
I did end up getting it from Barbour. They had something 1 1/4" wide and 3/16" thick, should be just right..... thanks for the info guys.
MidOcean thanks for the account use....oh and if you see a couple sticks of trim molding on next months statement....wasn't me
I did end up getting it from Barbour. They had something 1 1/4" wide and 3/16" thick, should be just right..... thanks for the info guys.
MidOcean thanks for the account use....oh and if you see a couple sticks of trim molding on next months statement....wasn't me
Last edited by jdub; 04-30-2010 at 03:41 PM.
#7
Registered
I would buy directly from Barbour Plastics. They are who supply Taco. Their number is 508-583-8200. They are usually trade only so feel free to use my acct. it's pre-pay. MarSalvor Corporation. They also have a lot of stuff on clearance from time to time.
http://www.barbourcorp.com/
Good luck.
T
http://www.barbourcorp.com/
Good luck.
T