Imco vrs Borla mufflers ??
#1
Registered
Thread Starter
Join Date: Dec 2007
Location: jackson hole wyoming
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Imco vrs Borla mufflers ??
Anybody try the new marine Borla mufflers exhaust tips
Building a new boat and trying to decide between the new Borla and the Imco what would you do ??
Building a new boat and trying to decide between the new Borla and the Imco what would you do ??
#2
Registered
Join Date: Jul 2009
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Have not tried either of these, both big names for sure. I have had good luck with GGB marine mufflers, ( www.ggb.ca) Ive had them on one of my boats a few years back and am having them build me a set right now on my new boat. Cut the sounds and didnt lose and speed.
MB
MB
#3
Charter Member
Charter Member
Join Date: Apr 2000
Location: Draper, Utah
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
I would go with IMCO! they were the first to design and produce a Gatling style muffler. Then Borla comes along and takes the design and runs with it. What else does Borla do for the boating community? Imco is there at every turn and are real innovators.
I had a set of the IMCO's and absolutely loved then. Stay with the original.
MP
I had a set of the IMCO's and absolutely loved then. Stay with the original.
MP
#4
Registered
I would go with IMCO! they were the first to design and produce a Gatling style muffler. Then Borla comes along and takes the design and runs with it. What else does Borla do for the boating community? Imco is there at every turn and are real innovators.
I had a set of the IMCO's and absolutely loved then. Stay with the original.
MP
I had a set of the IMCO's and absolutely loved then. Stay with the original.
MP
#6
Registered
Join Date: Apr 2005
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
We use sell and install both brands. The Borla muffler is a bit more exclusive, however a nice product for larger hp motors. The Imco works well also, however the choice will depend on the available room for the muffler, the engine specs and the look you may want to achieve. Here is a video of one of our 725 efi engines with a pair of the Borla's on it. Thanks
http://www.youtube.com/watch?v=fM-C54IJ2h8
http://www.youtube.com/watch?v=fM-C54IJ2h8
#7
Registered
Join Date: May 2004
Location: Yorba Linda, CA and Willow Valley, AZ
Posts: 172
Received 0 Likes
on
0 Posts
I have Imco Gatlin style on my boat, they worked very well. I removed them and noticed no difference except a bunch louder. I have Teague 1,200's in my boat.