NEED HELP finding lower unit gears ASAP!!!!!
#1
Registered
Thread Starter
Join Date: Jul 2005
Location: Boyne City, Michigan
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
NEED HELP finding lower unit gears ASAP!!!!!
Hey guys-
My boat is in the shop and apparently the upper gears in my lower unit are shot. 2 teeth broke for some reason. We're having a huge problem finding the parts we need! Calls to every possible place we can think of are coming up dry. They say they are back ordered something like 3 weeeks or more! i don't know sh!t about whatever part we're looking for. Here is what my mechanic told me we need though..........
150 ratio gear, 27 pinion-32 forward/reverse.
serial #OM115972 (lower unit #?)
model #859776
Not sure what all info you might need but my boat is a 2002 Baja 25 Outlaw, Bravo 1, 496HO.
I'm truly lost in all of this part talk but this is what i have gathered from it! If you know and have whatever part it is we're looking for please email me or call asap!!!!
[email protected]
231-675-5477 Thanks, Bill
My boat is in the shop and apparently the upper gears in my lower unit are shot. 2 teeth broke for some reason. We're having a huge problem finding the parts we need! Calls to every possible place we can think of are coming up dry. They say they are back ordered something like 3 weeeks or more! i don't know sh!t about whatever part we're looking for. Here is what my mechanic told me we need though..........
150 ratio gear, 27 pinion-32 forward/reverse.
serial #OM115972 (lower unit #?)
model #859776
Not sure what all info you might need but my boat is a 2002 Baja 25 Outlaw, Bravo 1, 496HO.
I'm truly lost in all of this part talk but this is what i have gathered from it! If you know and have whatever part it is we're looking for please email me or call asap!!!!
[email protected]
231-675-5477 Thanks, Bill
#3
Registered
Thread Starter
Join Date: Jul 2005
Location: Boyne City, Michigan
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
im not looking for a spare. i just wanna be on the water asap! apparently this part im after runs between 1,000 and 1,300 bucks! so i wanna know WHAT is it? and WHERE can i buy it? I need it like NOW!
#4
21 and 42 footers
Platinum Member
It's the entire gear set (3 gears)......and it's at least that much. Plus labor. Since those need to be replaced, I hope your mechanic looks real close at the bearings, etc...you might need a couple other (cheaper) parts.
#6
Registered
Thread Starter
Join Date: Jul 2005
Location: Boyne City, Michigan
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys. i'll try and get a part # or something tomorrow from my mechanic and then call the ones mentioned. in the mean time....i'm still looking for ideas on places to look so keep them coming!
#7
Offshoreonly Advertiser
Offshoreonly Advertiser
There is a good chance we have the gear set or an upper rebuild kit on the shelf.
Normally the HO comes with an X drive, but with that serial yours is the standard version.
Verify the part number you need and check with us in the AM. Email is better, the phone will be ringing off the hook tomorrow.
Normally the HO comes with an X drive, but with that serial yours is the standard version.
Verify the part number you need and check with us in the AM. Email is better, the phone will be ringing off the hook tomorrow.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#8
Registered
Thread Starter
Join Date: Jul 2005
Location: Boyne City, Michigan
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
awesome! what's the # just incase? im gonna be on the road tomorrow and it's doubtful i'll be near my computer? what's your website? i'm computer DUMB!
ok...forget it. i found our info! haha i'll contact you guys tomorrow!
ok...forget it. i found our info! haha i'll contact you guys tomorrow!
Last edited by Freeryd; 05-27-2010 at 08:55 PM. Reason: im dumb!