Rust colored stains on props
We used Sno Ball on our props to remove the hard water stains. How we have a rust colored stain on the props. Is there anything we can do to remove the stains from the props?
|
I use NOXON 7 - the stuff is great.
|
I used to try to get all of the surface rust stains off completely after a weekend, but Bblades informed me that because the blades had been thinned toward the ends, it might cause them to lose what I had paid for labbing. Now I just spray with WD40 after using.
|
Originally Posted by Rebel_Heart
(Post 3129977)
I used to try to get all of the surface rust stains off completely after a weekend, but Bblades informed me that because the blades had been thinned toward the ends, it might cause them to lose what I had paid for labbing. Now I just spray with WD40 after using.
|
The acid in toilet bowl cleaner, more than likely, ate the finish or any polish that was on there.
|
We use Sno Ball on exhaust tips to clean them all the time. We have never had a problem on the tips. Should we not use this anymore? Will polishing the props stop the rush stains?
|
All times are GMT -5. The time now is 07:51 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.