optioning a new cigarette

[fkboatman]

what would you put in boat. hear is what i have.
1. 700 sc and #6 drives
2. toilet with macerator and holding tank. (wife)
3. billet package
4. dock lights
5. inverter
6.No stereo will do high end at home.
7.fender holders
8.more engine room lights
9 shore power
10. battery charger
and also the standard equipent.

[tanner]

Originally Posted by fkboatman

what would you put in boat. hear is what i have.
1. 700 sc and #6 drives
2. toilet with macerator and holding tank. (wife)
3. billet package
4. dock lights
5. inverter
6.No stereo will do high end at home.
7.fender holders
8.more engine room lights
9 shore power
10. battery charger
and also the standard equipent.

Buy a 2 or 3 year old one and save yourself 300K.. and you can install anything you want and still have cash leftover !

[Back4More]

Skip the docking lights

[BONDO10]

Lip-Ship edition...

[seafordguy]

Powder Coated ALUMINUM Gooseneck MYCO.

[Quinlan]

Originally Posted by BONDO10

Lip-Ship edition...

BINGO!

[Biggus]

Originally Posted by BONDO10

Lip-Ship edition...

Right On.

If I was fortunate enough to buy a new Cigarette, it would have to be a Lip Ship Edition. His service after the sale is second to none.

Kurt

[cigrocket]

The setup alone and propping at Lipship will make it worth it. Plus everything else will just have a little extra.

[Sydwayz]

Do not put dock lights on the bow. They are worthless and ugly.
Make sure EVERY light on the boat is LED.
You do want underwater transom lights.

Have them install an extra rigging tube on each side of the boat from the front of the engine room to the middle of the cabin. As a matter of fact, have them install two on the port, and one on the starboard. This would be for your stereo install. You will have easy and unobstructed access from front to back with your own tubes for stereo signal. The extra tube on the port side will be for power from your engine room to your cabin where your amps/capacitors/extra batteries will be.

The less chrome/stainless you put on the boat, the less polishing you have to do. Powdercoat/paint/anodize everything.

[Indy]

Originally Posted by Back4More

Skip the docking lights

Agreed