Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   i need fuel injection help 32 skater, blown big blocks (https://www.offshoreonly.com/forums/general-boating-discussion/239235-i-need-fuel-injection-help-32-skater-blown-big-blocks.html)

smiklos@sunprint 09-16-2010 09:02 PM

Parker

Go see the guy's at Innovation they are fair and knowledgeable.
Steve

PARKER RABE 09-17-2010 09:08 AM


Originally Posted by fountain40icbm (Post 3210019)
Sorry to hear about your problems. Just curious but what32 do you have?

32 skater B'YOND REASON

PARKER RABE 09-17-2010 09:13 AM

Im Really Leaning Towards Selling All The Fuel Injection , With All The Accel Programing, Throttle Bodies ...everything For Around $3800......really Wana Go To Carbs , Owned The Boat For 4 Months And Only Used It Once. Because Of This .

PARKER RABE 09-17-2010 09:42 AM

Thanks For All The Help Guys And The Recamendations, Im Really Having A Tuff Time Deciding What To Do , Fly Someone In And Pay A Fortune Having It Set Up And Programed Or Just Trading It All For 4 Carbs And Being Done With It? What Would You Guys Do ? Im At A Cross Road With All Of This ......at Leats I Know How A Holly 850 Works , And Can Have It Rebiult Anywhere In Town......been So Shook Up For 4 Months Looking At This Thing Sitting On The Trailer Everyday.

TxHawk 09-17-2010 10:01 AM

Didn't the boat have new power when it was sold?

northernoffshore 09-17-2010 11:32 AM

I have a set of new dominators 1050's with flame arrestors and cable brackets, in ft. myers.

TxHawk 09-17-2010 02:30 PM

Repower Thread:
http://www.offshoreonly.com/forums/s...new-power.html

RunninHotRacing163.1 09-17-2010 02:44 PM


Originally Posted by TxHawk (Post 3210588)

Brad Zastrow




Join Date: Jun 2001
Location: McHenry, Illinois
Posts: 1,737

The donor block and accessories were 575's. Everything else is better. Crank, rods, pistons, roller cam, superchiller, blower shop blower, DFI, ignition, throttle bodies all upgrades. 510 cubic inch.__________________:angry-smiley-038:


OMFG :eek: well gag me with a spoon :lolhit:



Daddy always said BUYER BEWARE !!!!!!!!!!!!!!!

GPM 09-17-2010 02:46 PM


Originally Posted by PARKER RABE (Post 3210344)
Thanks For All The Help Guys And The Recamendations, Im Really Having A Tuff Time Deciding What To Do , Fly Someone In And Pay A Fortune Having It Set Up And Programed Or Just Trading It All For 4 Carbs And Being Done With It? What Would You Guys Do ? Im At A Cross Road With All Of This ......at Leats I Know How A Holly 850 Works , And Can Have It Rebiult Anywhere In Town......been So Shook Up For 4 Months Looking At This Thing Sitting On The Trailer Everyday.

Accel Gen 7 is not an easy one to tune! you're probably better off with carbs.

Strip Poker 388 09-17-2010 02:48 PM

your still going to have to tune the carbs


All times are GMT -5. The time now is 04:06 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.