Prop Repair in NY Help Needed
#1
Prop Repair in NY Help Needed
A friend of mine has a ski boat with an inboard. He thinks the prop is brass. He was looking for a repair place in NY. He lives in Yonkers area. I remembered S&S Propeller in Queens, not sure if they are still in business. Anyone know of any place else?
Thanks
Thanks
#2
Registered
Join Date: Oct 2005
Location: LI, New York
Posts: 1,491
Likes: 0
Received 0 Likes
on
0 Posts
Ski boat propellors are usually brass. I've always heard good things about Long Island Propellors, might want to give them a shot.
#6
I have horrible luck Johnny. Leaving the ramp i ran into a bunch of mud, it grabbed the prop and shut the motor down, but I started it up and was in the 5 mph zone to the restaurant. No issues. When the run started I got up to 65mph, 1.8 miles on the gps and the port motor overheated. I had to stop. On one motor back to the ramp the other motor was very hot also. My boat runs like Old Faithful, I did so much planning, programming, full tank of gas, entrance fee and wasnt even able to do the run. Sucked!
#9
Registered
Join Date: Sep 2002
Location: Manhasset, NY
Posts: 1,943
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to hear that......That SUX.... same thing happend to me last year at the ramp......sucked up mud and was't getting enough water out the exaust......luckily my friend Vinny saved the day by removing all the water lines, and back flushing everything possible.......oil cooler, etc,etc.......
#10
Sorry to hear that......That SUX.... same thing happend to me last year at the ramp......sucked up mud and was't getting enough water out the exaust......luckily my friend Vinny saved the day by removing all the water lines, and back flushing everything possible.......oil cooler, etc,etc.......