Originally Posted by thunderusone (Post 3227547)

Young Performance Marine 598ci 3.3L Whipple Motors. 43 hours on 300 hour set up. These are built with the best parts money can by. Lunati Blower series Cranks, Oliver Rods, JE Pistons, total seal rings, Dart Heads with a TON of port work. I have the dyno video....they broke 1200 ft lbs around 3500 to 3600rpm. We started the pulll at 4000 rpm and they made 1134ft lbs at that point. They idle like a 500 efi and you my wife can dock it. Shifts in and out of gear and NEVER touch the throttles. They are tuned on the money. All you do is ride and change oil. The throttle response is unbelievable. House of Color Paint. Serpentine drive, Etc....etc. These engines look as good from the back or bottom as they do from the the top or front. They do not leak oil and the driviability and fuel consumption is like a great big 500 Merc. Motors are in the boat. If interested, we can take the boat out and let the motors speak for themselves. Warranty is available. These are not cheap engines and you get what you pay for. If you want 5 to 6 summers of trouble free boating then this is the set up for you. PM me if interested.

Thanks!

Originally Posted by NAUTI CLINT (Post 3227947)

We have some 1000HP Zull's out of a 42 MTI. 510CID, 5 Liter Whipple (Very Cool), 7600RPM, Oberg's were clean when they came out. I would have them gone thru, but the price is cheap. 618-410-6356 Worth the call.

Originally Posted by mean streak (Post 3228379)

Is 7600 rpm's normal for around a 1000 hp?

Originally Posted by mean streak (Post 3228379)

Is 7600 rpm's normal for around a 1000 hp?

Originally Posted by thunderusone (Post 3228395)

It is with 510 inches of motor. Whcih will also not last a season at that kind of RPM. Remember ours are built on 598ci platforms. They are overbuilt.....produce gobs off power everywhere in the rpm band and you dont have to wind them much past 5500 rpm to get there. Thats why you have 300 trouble free hours on your motors. If someone buys those motors...goes through them... you still have a jacked up combination of miss matched parts. You could buy mine and be boating for years to come. :)

Don't forget I have your poker run dvd over here at the shop. Stop by when you are in the neighborhood or I can buy lunch one day this week.

Originally Posted by TCBoss302 (Post 3228612)

Thunderusone,

Are you repowering your OL or selling? Your boat is one of my all time favorites!