Fountain Lovers Do Not Open
11-19-2010, 12:05 PM
#22
Gold Member
Gold Member
11-19-2010, 01:37 PM
#26
Platinum Member
Platinum Member
From the SBI Rules:
You must run a sealed “SBIP Certified Race Engine”
Which are:
The Mercury 525 Sealed engine is approved for competition
The Mercury 500 EFI Sealed engine with the Innovation upgrade is approved for competition.
The Innovation HP3 Sealed engine is approved for competition.
The SBIP 525 HP Sealed engine is approved for competition.
Certification and Sealing - To be eligible for competition in these classes, all individual engines of the approved type listed in paragraph 1.12. above, first must be certified and sealed prior to competition by an SBIP approved source in accordance with the then existing procedures established by SBIP, with the “approved” seals as supplied from SBIP. IT IS THE RACERS' RESPONSIBILITY TO HAVE THEIR ENGINE (S) INSPECTED AND SEALED BY an SBIP approved source. If for any reason a seal is broken or the engine must be “freshened” or repaired, the engine must be examined, repaired, serviced and re-certified by an SBIP approved source. Broken or missing seals will be grounds for disqualification and other penalties. Currently the ONLY Approved Sealing & Servicing Center is:
Mercury Racing
N 7480 County Rd. “UU” Fond du Lac, WI
Phone: 920-921-5330
Innovation Marine
8011 15th St. East Sarasota, FL 34243
Phone:941-355-6791
=================
They were running, amongst other things, an aluminum flywheel - which are not an approved component of a "SBIP Certified Race Engine"
You must run a sealed “SBIP Certified Race Engine”
Which are:
The Mercury 525 Sealed engine is approved for competition
The Mercury 500 EFI Sealed engine with the Innovation upgrade is approved for competition.
The Innovation HP3 Sealed engine is approved for competition.
The SBIP 525 HP Sealed engine is approved for competition.
Certification and Sealing - To be eligible for competition in these classes, all individual engines of the approved type listed in paragraph 1.12. above, first must be certified and sealed prior to competition by an SBIP approved source in accordance with the then existing procedures established by SBIP, with the “approved” seals as supplied from SBIP. IT IS THE RACERS' RESPONSIBILITY TO HAVE THEIR ENGINE (S) INSPECTED AND SEALED BY an SBIP approved source. If for any reason a seal is broken or the engine must be “freshened” or repaired, the engine must be examined, repaired, serviced and re-certified by an SBIP approved source. Broken or missing seals will be grounds for disqualification and other penalties. Currently the ONLY Approved Sealing & Servicing Center is:
Mercury Racing
N 7480 County Rd. “UU” Fond du Lac, WI
Phone: 920-921-5330
Innovation Marine
8011 15th St. East Sarasota, FL 34243
Phone:941-355-6791
=================
They were running, amongst other things, an aluminum flywheel - which are not an approved component of a "SBIP Certified Race Engine"
11-19-2010, 01:49 PM
#27
Platinum Member
Platinum Member
Just the rules
11-19-2010, 09:49 PM
#30
Registered
Hey.....you seen the spot price of gold lately??? Reggie has chain necklace needs that must be met. Then there's his barber.....that chit costs $$$$ man....gotta get wins to earn the scratch! 
