Gary Armington
11-24-2010, 10:16 AM
#1
VIP Member
Gary Armington
Does anyone know how i can reach Gary Armington? I am gearing up to do some major repair to the Cleveland Construction Talon and would like to chat with him about the original build. What core, resin etc? Thanks all
I will say this, that is one incredibly well built boat. Attention to detail in the layup is very very high and consequently makes my job of repairing her much easier.
I will say this, that is one incredibly well built boat. Attention to detail in the layup is very very high and consequently makes my job of repairing her much easier.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Last edited by glassdave; 11-24-2010 at 10:38 AM.
11-24-2010, 08:28 PM
#2
Registered
iTrader: (3)
Join Date: Dec 2003
Location: Cleveland, OH / Pewaukee, WI
Posts: 5,870
Received 365 Likes
on
209 Posts
Does anyone know how i can reach Gary Armington? I am gearing up to do some major repair to the Cleveland Construction Talon and would like to chat with him about the original build. What core, resin etc? Thanks all
I will say this, that is one incredibly well built boat. Attention to detail in the layup is very very high and consequently makes my job of repairing her much easier.
I will say this, that is one incredibly well built boat. Attention to detail in the layup is very very high and consequently makes my job of repairing her much easier.
You could try reaching his Cousin Jim, He would probably have his number.... Jim owns Buckeye Sport Center out of Akron. I remember he did have a Talon at the Cleveland show many moons back.....
http://www.buckeyesportscenter.com/
Jr.
