Carb spacers for HP 500 Carb motors
#1
Charter Member
Charter Member
Thread Starter
Carb spacers for HP 500 Carb motors
Has anyone tried these on a HP500 carb? I'm wondering if they work?
http://www.highvelocityheads.com/
Thanks,
MD
http://www.highvelocityheads.com/
Thanks,
MD
#3
Charter Member
Charter Member
Thread Starter
Thanks Guys,
Mike, I'll look into the High Velocity heads and see if they are making anything for Marine/Mercrusier apps. And yes, I think it would require a Fuel hard line replumb, and what I'm more interested in is do you have to re-jet after install. I'll check out the bruke power guys also.
MD
Mike, I'll look into the High Velocity heads and see if they are making anything for Marine/Mercrusier apps. And yes, I think it would require a Fuel hard line replumb, and what I'm more interested in is do you have to re-jet after install. I'll check out the bruke power guys also.
MD
#4
Registered
Join Date: Jun 2001
Location: Michigan
Posts: 3,345
Likes: 0
Received 0 Likes
on
0 Posts
u r on to somthin....and no it does not require new fuel line plumbing....u may want to buy some coper np washers to re-ass. the lines....scrap the choke too...well that's what i hear any way!LOL