Bup
#1
Registered
Thread Starter
Bup
I just bought a 2008 Coblat 272 with the 496, have problems with the 496 to going over 4200 rpm without it popping through the intake. Changed sparkplugs today to see if that would clear up the problem, made no difference, checked all plug wires and they all seemed good. Called BUP because I live in Dallas, BUP lives in Fort Worth. John took time to talk to me on the phone, knew exactly what my problem is with the cool fuel 3 issue and offered to schedule to fix my boat.
You guys don't know how valuable BUP was to this sight and luckily I've become acquainted with him and he has always been willing to help and take his time to give me information.
You guys don't know how valuable BUP was to this sight and luckily I've become acquainted with him and he has always been willing to help and take his time to give me information.
The following 2 users liked this post by Texascuda:
PA.WOODCHUCK (08-04-2020), Padraig (08-03-2020)
#3
Registered
iTrader: (4)
He didn't tell you how to fix it?
Last edited by Rookie; 08-03-2020 at 08:30 PM.
The following 6 users liked this post by Rookie:
bajaholic (08-04-2020), boatnt (08-03-2020), F-2 Speedy (08-04-2020), Griff (08-03-2020), SABER28 (08-04-2020), thirdchildhood (08-04-2020)
#4
Registered
Thread Starter
So what you are saying is... You had a problem with your boat, called a mechanic, got through to mechanic, had conversation with mechanic (obvious not Manning) and he scheduled you to bring it in so he could fix it. Isn't that how it is suppose to work?
He didn't tell you how to fix it?
He didn't tell you how to fix it?
The following 9 users liked this post by Griff:
bajaholic (08-04-2020), bulletbob (08-04-2020), F-2 Speedy (08-04-2020), ICDEDPPL (08-04-2020), Knot 4 Me (08-04-2020), phragle (08-06-2020), Rookie (08-04-2020), scarabman (08-04-2020), thirdchildhood (08-04-2020)