cost on re-doing the seats?
02-15-2011, 01:48 PM
#2
Registered
Not sure on price, but XT should be the man you call to redo a Baja. Here's the link
http://www.xt-innovations.com/
http://www.xt-innovations.com/
02-15-2011, 01:52 PM
#3
Registered
Join Date: Oct 2005
Location: LI, New York
Posts: 1,491
Likes: 0
Received 0 Likes
on
0 Posts
I suggest you fill out your profile for location. Then you'll probably get some recommendations for some shops closer to you to get some prices worked out.
02-15-2011, 02:12 PM
#4
Registered
Thread Starter
Join Date: Aug 2010
Location: Chicago IL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
02-15-2011, 02:16 PM
#5
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
Fixx
here is some of his work,,scrool down to the bottom of the page,
http://www.powercatboat.com/Group/ES_17h/ES_17h1.html
Last edited by FIXX; 02-15-2011 at 02:30 PM.
02-15-2011, 07:45 PM
#6
Registered User
Gold Member
Join Date: Apr 2007
Location: prince george,va
Posts: 1,474
Likes: 0
Received 0 Likes
on
0 Posts
4yrs ago i got my rear bench seat done,the back rest,and the swim platform and it was 1500.00 and i took the stuff to him.nothing fancy,two tone red and white.i am in virginia.
02-15-2011, 08:27 PM
#7
Registered
I got quotes from XT and some local shops and everyone came in at about the same price, $3,500. THis was to recover all cockpit panels and seats. This is with no repair of rotted wood, foam etc. Also I pulled all interior panels and will be putting them back in once the vinyl work is done. Since you are in the Great Lakes area I would assume pricing for you would be similar as I am in Detroit. Oh, mine was for a Velocity 260 so cockpit size is similar.
02-16-2011, 06:48 AM
#9
Registered
I had custom canvas in fox lake do a deck boat for me , lots of pieces and he did a new canvas, was around $2000 but I did it in dec. when everyone was slow.my 2 cents if your going to do it. get the pieces to somebody now when spring hits they will all be busy. it will be harder to get a deal, and cash always helps
02-16-2011, 09:15 AM
#10
Registered
I'd be curious on the estimated cost of redoing my rear hatch on my 32 Victory. The vinyl is not ripped or worn, but this boat sat outside quite a while before I bought her and the solid white is yellowed pretty bad. Also, I'd like to add some color like some red and blue streaks to match the gel pattern. Here in Arkansas though, there are not too many choices when it comes to custom marine interiors. I figured I'd have to take her to TX.
