If you can't find it....Make it. DIY fuel injection
11-09-2010, 09:21 AM
#1
Registered
Thread Starter
If you can't find it....Make it. DIY fuel injection
Here are some pics of a fuel injection setup I'm building. No one makes an injector plate and rail to go on top of either a roots blower or PSI that holds either 10 or 12 injectors. There are only 8 or 16 injectors, and the 16 setup won't work for me. So, I make my own. I've several of these in the past, so I thought I would put some pics up. Maybe someone will make their own, or I would be glad to make one for them.
This is going on top of a PSI, but it will work on a roots, B&M, top entry Whipple, etc. On top of the injector plate will be (2) 2000 cfm throttle bodies. The fuel rail has a 5/8" id, so it will really flow some fuel.
I put up a few more pics as I finish it up. Thanks for looking. Enjoy.
Eddie
This is going on top of a PSI, but it will work on a roots, B&M, top entry Whipple, etc. On top of the injector plate will be (2) 2000 cfm throttle bodies. The fuel rail has a 5/8" id, so it will really flow some fuel.
I put up a few more pics as I finish it up. Thanks for looking. Enjoy.
Eddie
Last edited by Young Performance; 11-09-2010 at 09:50 AM.
11-09-2010, 09:53 AM
#4
Registered
That is way cool. I had been working on a similar project about a year ago. We were working on replicating some old school slide valves for a Porsche project, but instead of old mechanical injection, we were going to go EFI. Something like this, with all modern guts...
11-09-2010, 04:04 PM
#6
Registered
That is way cool. I had been working on a similar project about a year ago. We were working on replicating some old school slide valves for a Porsche project, but instead of old mechanical injection, we were going to go EFI. Something like this, with all modern guts...
11-09-2010, 04:52 PM
#8
Registered
Platinum Member
11-09-2010, 05:12 PM
#9
That is way cool. I had been working on a similar project about a year ago. We were working on replicating some old school slide valves for a Porsche project, but instead of old mechanical injection, we were going to go EFI. Something like this, with all modern guts...
11-09-2010, 05:16 PM
#10
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
Innovation is the life blood of performance!
Good Job Eddie:
We made some pretty cool electronic injection for our 8.1L 496 thru 600 cubic inch engines.
Its a lot of designing, prototyping, engineering, tooling, etc,etc,etc. But if it were easy, anybody could do it!
Best Regards,
Ray @ Raylar
We made some pretty cool electronic injection for our 8.1L 496 thru 600 cubic inch engines.
Its a lot of designing, prototyping, engineering, tooling, etc,etc,etc. But if it were easy, anybody could do it!
Best Regards,
Ray @ Raylar
