95 non mag 454 specifications
#1
Registered
Thread Starter
Join Date: Apr 2010
Location: Lake Travis
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
95 non mag 454 specifications
carb cfm?
intake?
heads? peanut port?
compression ratio? 8.5:1?
rotating assembly? forged, cast, hyper eutectic?
mains? 4 bolt?
intake?
heads? peanut port?
compression ratio? 8.5:1?
rotating assembly? forged, cast, hyper eutectic?
mains? 4 bolt?
#2
Registered
Thread Starter
Join Date: Apr 2010
Location: Lake Travis
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
This thread
http://www.offshoreonly.com/forums/g...questions.html
and this page
http://www.perfprotech.com/store/art...fications.aspx
answered my questions. I knew the heads were fairly ****ty, but damn cast pistons and a cast crank...
http://www.offshoreonly.com/forums/g...questions.html
and this page
http://www.perfprotech.com/store/art...fications.aspx
answered my questions. I knew the heads were fairly ****ty, but damn cast pistons and a cast crank...