RPM 26 Redline/Teague 800 - Video
#12
Registered
Platinum Member
Thread Starter
Join Date: Sep 2002
Location: Harpersville, AL
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
#13
Registered
Platinum Member
Thread Starter
Join Date: Sep 2002
Location: Harpersville, AL
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
#17
Registered
Platinum Member
Thread Starter
Join Date: Sep 2002
Location: Harpersville, AL
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
It has a lot to do with the hull design. Our bottom is significantly different then anything else out there in the 22-30' size range and even most of the bigger cats. We did not "copy" anybody's bottom design. Instead we went with a complete CAD/5-axis plug which enabled us to do things differently with compression and aero lift. We have also learned a few things in the past year with regards to setup and CG that allowed us to pick up more speed over what we were already able to do.
#18
Registered
According to Dustin Whipple hes never seen a Teague 800 not make substantially more than 800 ponies. Bob has soo much r&D into that combo its silly. Its actually carb approved now which is no small feat at all.
Enjoy and keep the vid coming!
UD