RPM 26 Redline/Teague 800 - Video
#51
arneson-industries.com
Offshoreonly Advertiser
We are running the SCX-4 2 1/16" to 2 1/8" above the centerpod and the #6 2.5" above. The problem that I see with running the Arneson (no offense Rik) is that we cannot get the propshaft centerline down that low due to the size of the box. Not to say that it won't work higher. The other problem is that we will have to "fill in" the notch in our centerpod in order to get the propshaft to its lowest possible location. I am not opposed to trying it and we probably have as good of a shot at making it work as anybody due to the location of our ceterpod relative to the outside sponsons. The real problem is finding someone with the "balls"/funds to try it. Again, no offense to Rik, I would love to do it but am not willing to make the modifications to a hull at my expense just to try it.
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#53
Registered
Platinum Member
Thread Starter
Join Date: Sep 2002
Location: Harpersville, AL
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts