Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Tyler Crockett-Raylar HO600 dyno results (https://www.offshoreonly.com/forums/general-boating-discussion/253879-tyler-crockett-raylar-ho600-dyno-results.html)

LAriverratt 05-25-2011 12:08 PM

yea, yea 1200 to 1300hp total is correct:grinser010:

Raylar 05-25-2011 01:21 PM

Think some here might be misunderstanding my reply.
What I am saying is that for about $15K a 496 owner can take his Merc 496 and turn it up to a reliable 625-650HP complete efi, N/A freshwater cooled long lived engine package.
If you want a HP- HP comparison lets check and see what a Mercury Racing 600SCI is selling for less drive, thats a good compariosn.
Can one build a 1200HP BBC with supercharging for $30K or so, absolutely. It won't go 400-700hrs, it will be an automatic Bravo drive no-go, so add in the new $25K drive it will require, the extra fuel it will take and the 150-200HR refresh periods required and guess what, Its a totally different animal!
Lets try and keep an apples to apples compariosn so most readers can equate it to their boats equipped with Merc. 496's.

Best Regards,
Ray @ Raylar

IinsureU 05-25-2011 01:22 PM


Originally Posted by Raylar (Post 3412415)
IinsureU:

Hey Blane

Good to hear from you on OSO!
I think your Raylar HO600 "Purple Monstas" were some of the first of the Raylar HO600's and if my memory serves me right along with Velocity Vectors, date back to 2005 and 2006.
Email your mailing address to the tech Raylar email address and I will mail you two new HO600 replacement stickers for your top plates.

Best Regards,
Ray @ Raylar

Yes, you are correct on all acounts...

I am actually looking for "New" plates, with new stickers applied of course. Happy to pay for them, just need to know the cost. [email protected] should work for an e-mail address to send me an invoice or whatever at your convenience.

LAriverratt 05-25-2011 02:18 PM


Originally Posted by Raylar (Post 3412597)
Think some here might be misunderstanding my reply.
What I am saying is that for about $15K a 496 owner can take his Merc 496 and turn it up to a reliable 625-650HP complete efi, N/A freshwater cooled long lived engine package.
If you want a HP- HP comparison lets check and see what a Mercury Racing 600SCI is selling for less drive, thats a good compariosn.
Can one build a 1200HP BBC with supercharging for $30K or so, absolutely. It won't go 400-700hrs, it will be an automatic Bravo drive no-go, so add in the new $25K drive it will require, the extra fuel it will take and the 150-200HR refresh periods required and guess what, Its a totally different animal!
Lets try and keep an apples to apples compariosn so most readers can equate it to their boats equipped with Merc. 496's.

Best Regards,
Ray @ Raylar

here is a 600sci for sale with exhaust for 35K with warranty...http://www.offshoreonly.com/classifi...o37827-en.html what headers would perform the best on the raylar??? what was used on the dyno to get those results??? add that to the 15K and there's a good comparison. is there a warranty on a raylar package????

Raylar 05-25-2011 10:47 PM

I am not exactly sure what header set Tyler used on this dyno test, but I know Wayne had a set of CMI Sporttubes to use on this engine.
Other customers have achieved slightly lower values (640-650HP) with E-Top dyno headers.

As for total cost you are correct that that approximate $15K cost does not include exhaust.

When Raylar does this engine upgrade on a customers Merc 496, we have a 1 year warranty on engine for recreational use only. I am not sure what Tylers warranty is possibly Tyler or Wayne will offer that information.

Best Regards,
Ray @ Raylar

Baja_man 05-26-2011 07:36 AM


Originally Posted by LAriverratt (Post 3412640)
what was used on the dyno to get those results???

Tyler used an old set of CMI sport tubes for the 496....they were wet also. I also am put on CMI sport tubes, there should be a picture of them early in this thread.

As far as cost for my complete project including R&R and all incidentals....$17,500.

LAriverratt 05-26-2011 07:48 AM


Originally Posted by Baja_man (Post 3413242)
Tyler used an old set of CMI sport tubes for the 496....they were wet also. I also am put on CMI sport tubes, there should be a picture of them early in this thread.

As far as cost for my complete project including R&R and all incidentals....$17,500.

that's not bad at all. I would need two sets of headers for sure along with new tail pipes so that would be an added cost for me. I have looked at different options for upgrades and I have corresponded with Ray before, not sure if he remembers, but, I just seem to keep coming back to Raylar as my #1 option:rolleyes:

Baja_man 05-26-2011 07:56 AM


Originally Posted by LAriverratt (Post 3413262)
I would need two sets of headers for sure along with new tail pipes

I know new Dana's can be had for ~$2800/set, quite a bit cheaper than the CMI's with similar results.

As far as my experience with Raylar, it has been great. He seems to available to answer any questions and returns phone calls. As I get the boat on the water with some real world numbers I will post that information too. My only real problem seems to be with marine mechanics in general. They just seem to take entirely too long with any project I give them. Tyler was probably the best, but I did not have hard deadlines that had to be meet and he had ample time to complete project on time, which he did. And I ALWAYS start these projects in the winter and am always scrambling to get boat by memorial weekend for some reason.:angry-smiley-038:

thirdchildhood 05-26-2011 08:04 AM

I think you need long tube headers for full potential with this n/a package. Another factor to consider is that when I switched from a 496 to the 525 my exhaust did not line up and I needed to change to a different style tail pipe to keep my Q&Q. I would have needed different tail pipes anyway but the new "Z" pipes were very expensive. I don't remember the exact amount but the exhaust relocation, pipes and painting the transom added several thousand $ to the re-power cost. Then the Bravo X let go after 7 hours.

Now put some $ away for that new drive....

LAriverratt 05-26-2011 08:07 AM

I would have to start something like this late fall and have it back together way before now. there are a couple good shops close to me that I would trust but I've never used them personally so I'm not sure how they are time wise. Our boating season here is long and I would hate to be without the boat for very long plus the tickfaw 200 is the first weekend of may and I sure wouldn't want to miss that one!!:evilb:

yep thirdchildhood...my worry is the drives when I do something!!!! what are ya gonna go to???


All times are GMT -5. The time now is 11:18 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.