454 supercharged Build
#11
Specs
Doing good Barry. Ok tell me a few things.
1). Who did you go with for pistons
2). Did you use the stock crank or an aftermarket
3). Did you run a intercooler
4. Was the block stock or punched/stroked
I assume that the edelbrock heads are the performer rpm or the E-CNC
Email me the dyne sheets please. [email protected]
Thanks
1). Who did you go with for pistons
2). Did you use the stock crank or an aftermarket
3). Did you run a intercooler
4. Was the block stock or punched/stroked
I assume that the edelbrock heads are the performer rpm or the E-CNC
Email me the dyne sheets please. [email protected]
Thanks
2.) Chevy LS7 tufftrided crank. We did have custom rod lengths. H-Beam rods.
3.) No intercooler - never had a preignition problem.
4.) .060 over
I'll dig out the dyno sheets and fax them to you in the next couple of days.
__________________
Thanks, Barry
Driver - High's Fuel Your Journey Cigarette Racing Team #598
Thanks, Barry
Driver - High's Fuel Your Journey Cigarette Racing Team #598