Setting 500 efi timing?
06-05-2011, 02:45 PM
#1
Registered
Thread Starter
Join Date: May 2009
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Setting 500 efi timing?
I need to set the timing on my 01 500 efi's. I know they have to be at 8 degrees and jump A and B terminals to put it into base timing mode.
My question is which terminal is A and B?
Any help would be much appriciated! Thank you!
My question is which terminal is A and B?
Any help would be much appriciated! Thank you!
06-06-2011, 09:21 AM
#4
VIP Member
VIP Member
Nick,
its the black wire and the white/black wire that are
adjacent to each other in the DLC plug.
its the black wire and the white/black wire that are
adjacent to each other in the DLC plug.
06-06-2011, 01:39 PM
#5
Registered
Thread Starter
Join Date: May 2009
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Thanks JT. Were going to fire them up today. Didnt have enough time yesterday. 400 hrs on them and not a single broken valve spring but the head gaskets were starting to go in between the cylinders.
