Originally Posted by cig28
(Post 3429578)
How about the the rubber grommet for the gear lube tube. the tube goes thru the transom and goes thru the grommet, the hose from the resevoir (sp)?to the bell housing. i've seen them dry up and shrink.
|
I've had em leak from the 4 way junction box as well as the top of the gimbal ring where it pivots. They have seal kits for both. If u can take and spray water from the inside and c if it leaks out where the junc box is. If not spray directly where the gimbal pivots from the inside if u can get to it, have someone watch from the outside while u spray
|
Another possible location
Another possible spot is where the trim indicator/limit switch wires pass through the transom assembly. It's just to the right of the bellows
|
All times are GMT -5. The time now is 07:05 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.