Offshoreonly.com
Page 1 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Help please! (https://www.offshoreonly.com/forums/general-boating-discussion/258731-help-please.html)

BY U BOY 07-24-2011 12:03 PM
Help please!
 
My wife broke the 3.5mm plug off in the AUX input on my ram. I have tried 2 small screwdrivers like tweezers but no luck. Any one have this problem before or have any ideas?

tomtbone1993 07-24-2011 12:09 PM
Magnet?

f_inscreenname 07-24-2011 12:16 PM
divorce?

BY U BOY 07-24-2011 12:20 PM
Originally Posted by tomtbone1993 (Post 3460622)
Magnet?
nope, no go.

BY U BOY 07-24-2011 12:21 PM
Originally Posted by f_inscreenname (Post 3460631)
divorce?
LOL, I like my stuff and would prefer to not give half of it away along with my paycheck:bigbird::party-smiley-004:

n20michael 07-24-2011 12:24 PM
Take a coat hanger or piece of wire, use a small brush or Q tip and put a dab of crazy glue or JB weld on it and see if you can pull it out that way, or, yank the dash and replace the input from the back

Michael

tomtbone1993 07-24-2011 12:40 PM
Originally Posted by n20michael (Post 3460637)
Take a coat hanger or piece of wire, use a small brush or Q tip and put a dab of crazy glue or JB weld on it and see if you can pull it out that way, or, yank the dash and replace the input from the back

Michael
Good idea

BY U BOY 07-24-2011 12:54 PM
Originally Posted by n20michael (Post 3460637)
Take a coat hanger or piece of wire, use a small brush or Q tip and put a dab of crazy glue or JB weld on it and see if you can pull it out that way, or, yank the dash and replace the input from the back

Michael
need to get some crazy glue. If that does not work I will have to pull the radio. Th AUX is in the radio itself.:angry-smiley-038:

97FASTech 07-24-2011 02:22 PM
What about a small screw/bolt extractor? Or grind a nail down so it is like an ice pick and try that. Gently tap them in to form a wedge, pull out.

f_inscreenname 07-24-2011 03:58 PM
Vacuum with a screen over the hose. Or a blast of air sometimes works.


All times are GMT -5. The time now is 05:30 AM.
Page 1 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.