drive questions on cig
#11
Registered
Thread Starter
Join Date: Mar 2006
Location: Atlantic City, NJ
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys
It is a 38 top gun ts 2004. I am trying 32s today and also have a set of 5 blade 34s to try. I also have a set of stock lowers to try but the engines are lower than on a 575 boat with its and standard lowers. I am going out to measure now.
Brian, its Andy maybe I will bring it down to the lake for a weekend.
It is a 38 top gun ts 2004. I am trying 32s today and also have a set of 5 blade 34s to try. I also have a set of stock lowers to try but the engines are lower than on a 575 boat with its and standard lowers. I am going out to measure now.
Brian, its Andy maybe I will bring it down to the lake for a weekend.
#12
Registered
Thread Starter
Join Date: Mar 2006
Location: Atlantic City, NJ
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
Here are some numbers and measurements.
my ITS box is 3.5 inches from bottom of notch.
the bottom of the upper is 7 7/8 in to the prop shaft
the prop shaft is 3 3/4 in below bottom
the cig next to me is 03 tg same motors ITS but standard bravos.
ITS box is 4 7/8 in from bottom
the upper is 10.5 in to prop shafts
the prop shaft is 5 inches below bottom.
props spin out on both boats
my ITS box is 3.5 inches from bottom of notch.
the bottom of the upper is 7 7/8 in to the prop shaft
the prop shaft is 3 3/4 in below bottom
the cig next to me is 03 tg same motors ITS but standard bravos.
ITS box is 4 7/8 in from bottom
the upper is 10.5 in to prop shafts
the prop shaft is 5 inches below bottom.
props spin out on both boats
#13
Registered
Platinum Member
Join Date: Nov 2000
Location: Lake Lanier - N. Georgia
Posts: 6,307
Likes: 0
Received 1 Like
on
1 Post
Thanks guys
It is a 38 top gun ts 2004. I am trying 32s today and also have a set of 5 blade 34s to try. I also have a set of stock lowers to try but the engines are lower than on a 575 boat with its and standard lowers. I am going out to measure now.
Brian, its Andy maybe I will bring it down to the lake for a weekend.
It is a 38 top gun ts 2004. I am trying 32s today and also have a set of 5 blade 34s to try. I also have a set of stock lowers to try but the engines are lower than on a 575 boat with its and standard lowers. I am going out to measure now.
Brian, its Andy maybe I will bring it down to the lake for a weekend.
#14
I can only spin my stock 32 bravos to 5100.
1.5s on Stellings boxes.
I have some lab 30s could hit 5800 w those.
Red line bumped to 5800 when we rebuilt.
edit Hit 5500 w the 32s this weekend. Just trim out more.
How far out do you guys trim to? I hit about 6
1.5s on Stellings boxes.
I have some lab 30s could hit 5800 w those.
Red line bumped to 5800 when we rebuilt.
edit Hit 5500 w the 32s this weekend. Just trim out more.
How far out do you guys trim to? I hit about 6
Last edited by Quinlan; 09-18-2011 at 07:45 PM.