dyno pull!!!!!
09-10-2011, 11:26 AM
#1
Registered
Thread Starter
dyno pull!!!!!
Well so far super happy with my motor at Ateco!! They do it right the first time that is for sure!!Here is a nice pull on pump gas. 1100hp and over 1000TQ at 3500rpm!!!! I am in love hahahaha
Thank you Skydog
http://m.youtube.com/index?client=mv...?v=wm5EJGa4Hdg
Thank you Skydog
http://m.youtube.com/index?client=mv...?v=wm5EJGa4Hdg
Last edited by skydog; 09-10-2011 at 11:29 AM.
Charter Member
09-10-2011, 12:35 PM
#3
Registered
Thread Starter
09-10-2011, 01:24 PM
#5
Registered
Join Date: Jan 2001
Location: Long Island, NY
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Platinum Member
09-11-2011, 10:11 AM
#9
Registered
Skydog,
I would not think they needed to do to much to get that hp with your current set up.
Did they just add more boost to get the additional hp or did they have to change cam and work carbs also.
Nice boat and motor.
Joel
I would not think they needed to do to much to get that hp with your current set up.
Did they just add more boost to get the additional hp or did they have to change cam and work carbs also.
Nice boat and motor.
Joel
09-11-2011, 10:29 AM
#10
Registered
Thread Starter
Thank u guys!!! Yea we added about 150hp and about 200tq at same boost level and less timming
Solid roller cam,lifters,springs,shaft rockers,innercooler,and added some bigger jets.
Again thank u guys can not wait I can now spin more Rpms too with shaft rockers. Sure hope for a vid of 130-135mph should be there.
Skydog
Solid roller cam,lifters,springs,shaft rockers,innercooler,and added some bigger jets. Again thank u guys can not wait I can now spin more Rpms too with shaft rockers. Sure hope for a vid of 130-135mph should be there.
Skydog
