454 merc need cam
#1
Registered
Thread Starter
Join Date: Oct 2011
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
454 merc need cam
so i want a little more umfff from my 7.4 merc, i was thinking the cheapest way to go is a cam but not sure what kind to get. i was looking at this one http://www.jegs.com/i/Comp+Cams/249/11-236-4/10002/-1 at Jegs but not sure if its to much for a stock set-up.
Last edited by grease; 10-25-2011 at 06:09 PM.
#2
Platinum Member
Platinum Member
iTrader: (1)
so i want a little more umfff from my 7.4 merc, i was thinking the cheapest way to go is a cam but not sure what kind to get. i was looking at this one http://www.jegs.com/i/Comp+Cams/249/11-236-4/10002/-1 at Jegs but not sure if its to much for a stock set-up.
#3
Charter Member # 55
Charter Member
Just a cam change is not going to do that much. Maybe 30hp which = 2mph.
Also, to go with any cam bigger than a stock 454mag cam, you are going to need betetr exhaust to prevent reversion.
Is it carbed or MPI????
Also, to go with any cam bigger than a stock 454mag cam, you are going to need betetr exhaust to prevent reversion.
Is it carbed or MPI????