Offshoreonly.com - Wilson Custom Marine on proboat.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Wilson Custom Marine on proboat.com (https://www.offshoreonly.com/forums/general-boating-discussion/264840-wilson-custom-marine-proboat-com.html)

E Colby

10-27-2011 03:30 PM

Wilson Custom Marine on proboat.com

We just posted this article on Wilson Custom Marine's drive blueprinting program on the Professional BoatBuilder web site. Hope you like it.

http://www.proboat.com/blueprint-for-speed.html

boating37

10-27-2011 05:57 PM

I like it, nice article Eric.

Boomer35

10-27-2011 06:30 PM

anyone done this with Imco SC lowers, ive been kicking around the idea for a while

fountainfan42

10-27-2011 07:02 PM

nice job , have heard lots of good things about WCM

offshoredrillin

10-27-2011 07:04 PM

great article!

pstorti

10-27-2011 07:23 PM

I like the idea but I wonder if it only makes sense to do on 100mph+ boats?

boating37

10-28-2011 04:34 PM

I'm sure it can work for boats that run lower then 100mph.
But guess the question would be best answerd by WCM.

WMF	10-28-2011 04:53 PM

Quote:

Originally Posted by Boomer35 (Post 3538099)

anyone done this with Imco SC lowers, ive been kicking around the idea for a while

I am looking into this for my Imco SC drives as well, does anyone have any info? I am going to speak with them after they get back from the FT Lauderdale boat show next week and get more info from them.

stainless

10-28-2011 05:06 PM

Great article Eric!

All times are GMT -5. The time now is 09:51 PM.