Trim/Tab Indicators
04-30-2002, 10:44 PM
#1
Charter Member #232
Charter MemberThread Starter
Trim/Tab Indicators
Does anyone know who makes the trim/tab indicators that raise straite out of the dash? I am trying to find a indicator that will allow us to relocate the indicators on Cig. 1's Cafe Racer from the stock location and have them come up out of the dash. I have seen them but do not know were they were or who makes them. Anyone know????
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
Last edited by Audiofn; 06-15-2002 at 06:34 PM.
05-01-2002, 08:49 AM
#2
OSO Moderator
Charter Member
I saw those at the Maimi show.
I think it was Marine Machine or Stainless Marine that had those.
I think it was Marine Machine or Stainless Marine that had those.
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
05-01-2002, 10:02 AM
#4
GOT MERC?
Join Date: Aug 2001
Location: Boynton Beach FL
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Audiofn,
If it is the style that I am thinking about that just has a round cylinder exiting out of the top of the dash with numbers on them.
Most of those are custom made but very easily done. They screw
on the end of a Morse 33-C cable that has a 10/32 thread. You use a Morse clamp to hold the cable.
If it is the style that I am thinking about that just has a round cylinder exiting out of the top of the dash with numbers on them.
Most of those are custom made but very easily done. They screw
on the end of a Morse 33-C cable that has a 10/32 thread. You use a Morse clamp to hold the cable.
05-01-2002, 07:20 PM
#5
Registered
gafrig makes one and stainless marine makes one the stainless one uses a smaller cable with a no slack spring loaded unit
it has a led light and has colored base that matches most bezel colors
it has a led light and has colored base that matches most bezel colors
05-01-2002, 07:21 PM
#6
Member #2 ....Jeeezz
Charter Member
Join Date: Oct 2000
Location: Kicked to the curb
Posts: 2,345
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Jon
__________________
Look Fast *** Sold Sold Sold *** ... F2 Cigarette Top Gun in OSO Classifieds
Look Fast *** Sold Sold Sold *** ... F2 Cigarette Top Gun in OSO Classifieds
05-01-2002, 09:46 PM
#7
Registered
Will you have any old trim indicators that will be left over/replaced with this new setup. I am looking to replace my merc indicators on my Formula 272 as they NEVER work right. was considering fabricating something utilizing encoders or rotational transducers for a trick super accurate setup. but if I can find used mechanical ones I may just go that route.
05-02-2002, 12:05 AM
#8
Charter Member #232
Charter MemberThread Starter
Rambunctious you will have to ask Cig. 1 about that. I am sure he will not need them after the retro fit. I will go check out the guys you all have mentioned.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
05-07-2002, 06:28 PM
#9
Member #2 ....Jeeezz
Charter Member
Join Date: Oct 2000
Location: Kicked to the curb
Posts: 2,345
Likes: 0
Received 0 Likes
on
0 Posts
Jon,
Check these out ..... I want 'em
Check these out ..... I want 'em
__________________
Look Fast *** Sold Sold Sold *** ... F2 Cigarette Top Gun in OSO Classifieds
Look Fast *** Sold Sold Sold *** ... F2 Cigarette Top Gun in OSO Classifieds
