Thank you, as soon as Arnaldo sends it to me, I will post.

2nd visit
 

http://www.predatorpowerboats.com/

just came in.

fine sanding of the deck is one of the last steps in the hull prep work.

The rotary air-driven sander is the hull specialist's best friend
|
|
|
v
http://i1238.photobucket.com/albums/...SC_0083_sm.jpg
http://i1238.photobucket.com/albums/...SC_0079_sm.jpg
http://i1238.photobucket.com/albums/...SC_0078_sm.jpg
http://i1238.photobucket.com/albums/...SC_0077_sm.jpg

My favorite part of that boat was windshield with grab rail built in on top..hope you still have it..it was a square stock..

I will ask the owner if the original windshield will be returned.

Thanks for the pic. Circa 1993 .

The hull was black originally as can be seen in above pics where the trimtabs covered the original gelcoat.

http://i1238.photobucket.com/albums/...al_90s_001.jpg

2nd visit to Predator Powerboats Factory
 

.
http://www.predatorpowerboats.com/
.

The new dash may not allow the old windshield to be re-installed. I shall ask nevertheless


These are the final hull prep work prior to the deck being primed with gray primer.
|
|
http://i1238.photobucket.com/albums/...SC_0098_sm.jpg
http://i1238.photobucket.com/albums/...SC_0092_sm.jpg
http://i1238.photobucket.com/albums/...SC_0088_sm.jpg
http://i1238.photobucket.com/albums/...SC_0087_sm.jpg
http://i1238.photobucket.com/albums/...SC_0085_sm.jpg

Great job..do you have to redo stringers and transom also?

If thats the boat from L.I. I thinked i owed that boat did it have a name on it DONT BLINK ? was a great boat not very fast but rode great for size.

3rd visit to Predator Powerboats Factory
 

http://www.predatorpowerboats.com/



The primer has been applied. Fine sanding will follow and may fill one more time. then a final primer will be applied and then the final colour.

http://i1238.photobucket.com/albums/...SC_0127_sm.jpg
http://i1238.photobucket.com/albums/...SC_0125_sm.jpg
http://i1238.photobucket.com/albums/...SC_0109_sm.jpg
http://i1238.photobucket.com/albums/...SC_0106_sm.jpg
http://i1238.photobucket.com/albums/...SC_0091_sm.jpg
http://i1238.photobucket.com/albums/...SC_0090_sm.jpg
http://i1238.photobucket.com/albums/...SC_0089_sm.jpg
http://i1238.photobucket.com/albums/...SC_0088_sm.jpg
http://i1238.photobucket.com/albums/...SC_0086_sm.jpg
http://i1238.photobucket.com/albums/...SC_0085_sm.jpg

will not be touching them, the stringers and transom are sound.

http://predatorpowerboats.com/


Seahawk is getting a final wet sanding. And will be ready for delivery soon!

Owner opted to have original colours. Inside cockpit is painted white

A windscreen will be put up also.

http://i1238.photobucket.com/albums/...SC_0370_sm.jpg
http://i1238.photobucket.com/albums/...SC_0369_sm.jpg
http://i1238.photobucket.com/albums/...SC_0368_sm.jpg
http://i1238.photobucket.com/albums/...SC_0367_sm.jpg
http://i1238.photobucket.com/albums/...SC_0366_sm.jpg
http://i1238.photobucket.com/albums/...SC_0362_sm.jpg