Originally Posted by frickstyle
(Post 3589003)
I have a set of Hawk 575s??? They have B&M 250s on top. I believe the previous owner upgraded the blowers.
So, were there two models, 525 and 575? |
Griff,
No "Hawk 575" decals present on engines. Only the Hawk World Champion Supercharged stickers on the flame arrestors. The valve covers just have the Hawk emblem on them. Really I am speaking of what I was told from the previous owner. I was looking at old original dyno sheets from Hawk Marine at Fort Apache, reported 576 HP @ 5200 with the B&M 250s. This may have been an upgrade "one-off" built at Hawk that was arranged by the owner, I can't really speak on that one. |
1 Attachment(s)
FWIW, I inquired on a '95 Powerplay that is supposed to have 575 Hawk engines. Below is a pic of them.
|
Originally Posted by Keytime
(Post 3589876)
FWIW, I inquired on a '95 Powerplay that is supposed to have 575 Hawk engines. Below is a pic of them.
|
525 = 420 with a 174 B&M blower single carb
575 = 420 with a 250 B&M blower Dual carb sometimes called 600's too. There were tons of 525 set ups built. There were a few of 502 set ups with 174 setups but they were hit or miss if they stayed together (502 setups). bolth were built on stock Merc Motor that were Brand NEW! FYI I used to work at Hawk and I built a ton of these motors. I was there when the splatter paint of the motors was just getting started and the 1000 NA MOUNTAIN motors were built. I was there in 1991 -1997. |
Originally Posted by oceanperf
(Post 3589291)
Merc 525 ran a Weiand 177. Hawk 525 ran a 174 B&M. Ocean Performance was the entire start of that with Bud and Craig.
|
How can you tell a 420 from a 502?
|
Originally Posted by Keytime
(Post 3589876)
FWIW, I inquired on a '95 Powerplay that is supposed to have 575 Hawk engines. Below is a pic of them.
|
Originally Posted by caseyh
(Post 3590862)
How can you tell a 420 from a 502?
|
Originally Posted by caseyh
(Post 3590907)
Roca marine said they were 502s (hawks) in that boat! And had issues but new blower fixed them. Or is it what was stated above the 502 the issue?
|
All times are GMT -5. The time now is 02:27 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.