cmi headers
02-08-2012, 07:54 PM
#5
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
Fixx
A stock 496 manifold will fit on a older mag merc engine then i would say that the 496 headers will fit a 525 SC..if the 496's are still in the boat i would have someone lock you in the bilge with a tape measure and measure from the center of the crankshaft bolt to the bottom of the hatch and then measure the center of the crankshaft to the air cleaner of the 525 SC..
02-09-2012, 07:28 AM
#6
Registered
iTrader: (3)
patrick,nort was just trying to make you,a newcomer,feel WELCOME,allthough he offered no advice or answer to your question,you will find that a lot of very smart people are on these forum,s,and can help with questions pertaining to marine issues.you will also find that no one likes a smart azz,and being polite will get you everywhear.WELCOME ABOARD,enjoy the ride!
02-09-2012, 08:57 AM
#7
Registered
Join Date: Oct 2002
Location: Menasha,WI
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
02-09-2012, 08:21 PM
#8
Registered
Yes I have a 36 outlaw with 525sc's from the factory. they fit just fine. However I have a deep x-dim meaning the engines are low in the boat as I have a 1998. I'm about 2" deeper then a 1999.
