FIVEPTOHH

Has anyone installed a Livorsi pop up led bow light..? The instructions online say that you have to drill a 3" hole in your boat...which isnt so bad but then I see they offer a cup to go under the light to catch the water but where would I route the water to so it doesnt ruin anything..?

GTOFFSHORE

I drilled a small through hull with a screen cover to let water drain. Tube attached to that runs up to the cup.

Philm

they make a little thru hull fitting that you can route right out of the side of the bow. I have one on each side, one for the light and one for my pop up cleat.

GTOFFSHORE

Yes that's what we have thanks for a better explanation

FIVEPTOHH

So does anyone think they are worth the effort..?

Philm

Yes, they are worth the effort. Unless you like water in your bow.

jmoore1225

iTrader: (1)

On the fountains in drains all the way back to the bilge as long as all the passage ways are clear...

US1 Fountain

iTrader: (1)

Doesn't yours have the small plastic thru hull drain fitting for the compartment behind the front mirror already? (Looks like a gas tank vent) Tie into that, or install one.

FIVEPTOHH

I donno if it does...how would I know..? Should I remove the mirror and look behind it..?

US1 Fountain

iTrader: (1)

If you do, there will be the small clam shell looking vent up below the bow eye, where you hook your winch strap.